Bernina 600
High standards

Bernina is a Swiss brand from Steckborn, Thurgau. Karl Friedrich Gegauf’s company dates from 1893, and in 1932 his sons moved production to a household machine developed by Fritz Gegauf and Wilhelm Brütsch. The name comes from a nearby mountain peak. The first zigzag model, the 117, appeared in 1938. The 125, a free-arm zigzag machine, followed in 1944–1945 depending on the source. The one millionth Bernina was produced in 1963, and fully electronic models arrived only in 1986. The Historical Dictionary of Switzerland calls Bernina the best-known Swiss sewing machine brand.
The 600 sits between two milestones. The 125 (1945–1963) set the free-arm format. The 530 Record (1954–1963) added the clip-on presser foot and semi-automatic buttonholes. The 600 shares the Steckborn construction and the free-arm layout of both. This dates to 1962, which overlaps the end of 530 production. The 730, launched in 1963, introduced the patented knee-operated presser foot lifter. The 830 followed in 1971 with electronic foot control. The 600 has no knee lifter and no electronic foot control. It was an entry-level alternative to the Record models and was made in smaller numbers than the 530 and the 700 series. Following models from the 700 series onwards also introduced the inboard tension unit and inlay channel instead of eyelets at the top, allowing the famous one-handed threading that would become characteristic of Bernina machines. Here, we still have a standard protruding tension unit closer to the needle, although it already features a check spring protected inside the unit itself instead of the usual outer hook spring.
The 600 is a mechanical zigzag machine with a free arm. Feet are the early Bernina “old style” type, with a rounded back and no cut-out, and the shank marking is three digits. The top dial is graduated from 0 to 4, matching the 4 mm maximum zigzag width of Bernina machines of this period. The machine has a drop-feed mechanism and a bobbin winder on the handwheel. It has two spool pins at the rear, each with a felt pad. The machine is driven by an external motor mounted at the back. A flat belt connects the motor to the handwheel, and the motor has a three-pin socket for the foot control. The motor plate reads Fritz Gegauf A.G., Bernina-Nähmaschinenfabrik, Steckborn, Schweiz. The base plate carries a printed ruler scale along its front edge.
The body is a one-piece cast frame in cream enamel. The top cover, head casing and bed top are olive green. The handwheel, belt guard and motor mount are in a darker khaki-brown. The head casing is rounded and has a thread guide at the top and a vertical slot for the take-up lever. The needle area has a chrome presser bar lever and a narrow free arm under the head. A knob on the front of the base bears two symbols, a stitch-pattern grid and a zigzag line. A second control knob sits on the arm above the needle, and a vertical lever with a knurled knob is on the right-hand face. The BERNINA logo is on the front of the arm and on the back of the head. “600” and “Made in Switzerland” are printed on the rear of the column, and the serial number is on the rear of the lower body. The machine stands on a flat enamelled base plate with four black rubber feet.
The 600 has no extra features beyond the zigzag and drop feed. Its design follows the 530 line: heavy, enclosed, with every control on the machine itself. The body is almost the same throughout the 500, 600 and 700 lines, with small differences in new features and configuration. The 600 series sits right in the middle between the early 125, the first portable, and the 730, which would establish all the mais features to be found along the following Bernina mechanical models up to the 1000 series, the last to be produced by Bernina before moving exclusively to electronic machines. This model’s operational ability depends mainly on the belt, the motor wiring and the plastic parts in the mechanism, as with other Bernina machines of this period. This unit presents excellent condition and conservation in all aspects, with only very minor cosmetic issues from use.
More on the Bernina 600:
https://hls-dhs-dss.ch/articles/041930
https://fiddlebase.com/swiss-machines/bernina
https://www.fundinguniverse.com/company-histories/bernina-holding-ag-history/
https://en.wikipedia.org/wiki/Bernina_International
Bhttps://bernina.com/en-US/Why-BERNINA-US/Quality-Tradition/History
https://sewing.patternreview.com/SewingDiscussions/topic/102275








ID
| Maker | Bernina |
| Brand | Bernina |
| Model | 600 |
| Year | 1962 |
| Serial number | 62117525 |
| Origin | Switzerland |
| Manufacture | Switzerland |
| Provenance | Great Britain |
| Status | Private Collection |
SPECS
| Voltage | AC 220 V |
| Bed type | Free arm |
| Bed extension | Yes |
| Feet/shank type | Proprietary, Bernina old style |
| Foot pressure adjustment | No |
| Bobbin type | Class 15 |
| Hook/race position | Vertical |
| Hook movement | Oscillating |
| Bobbin winder | Yes, at hand wheel |
| Spool pins | 2 |
| Bulb type | E14 |
| Original foot control | Yes |
| Current foot control | Original |
| Dimensions | |
| Weight |
FEATURES
| Zigzag | Yes, 4 mm |
| Reverse type | Momentary / permanent |
| Needle position control | Yes, 3 steps |
| Stitch length limiter | No |
| Stitch width limiter | No |
| Utility stitches | No |
| Decorative stitches | No |
| Stretch stitches | No |
| Auto-reverse stitches | No |
| Double needle provisions | Yes |
| Drop feed | Yes |
ACCESSORIES
| Presser feet | 000 |
| Straight stitch needle plate | No |
| Feed dogs cover plate | No |
DOCUMENTS
| User manual | Download PDF: |
| Service manual | Download PDF: |
